and many other countries, pilot visual contact with the aircraft must be maintained at all times. This makes the system suitable for FPV flying and aerial videography, where real-time feedback is essential Up to One Mile Wireless Range The air end module supports a line-of-sight range of up to a mile, depending on environmental conditions and other variables When using HDMI resolutions of to 1080p at 30 fps can be transmitted Low Latency The video link features a latency of approximately 150ms. Compatible flight controllers included: A2, WooKong-M, Naza-M V2, and Phantom 2 HDMI and AV Video Input with Full HD Transmission The air-end module supports both analog composite and HDMI signals. Requires Compatible Flight Control System Lightbridge works with select DJI multi-rotor flight control systems. There is a powered USB port on the ground end to connect your mobile device and keep its battery from running down. To view the video feed and OSD overlay you will need an Android mobile device running the Lightbridge app, a free download from DJI. To operate the aircraft, the system allows you to use your regular 2.4 GHz radio controller and will also receive a gimbal control signal. It can be battery powered from an internal 4000 mAh battery that lasts up to 4.5 hours or an external 3S to 6S Li-Po battery, available separately. The ground end component features the form factor of a wireless router. The air end module can also send a control signal to the gimbal for in-flight operation of camera movements. It also communicates with the flight computer, sending pilot inputs from the radio controller (transmitter) to the flight controller and receiving flight data from the instrumentation for the sake of the OSD. The air end component is a module that installs in or on the aircraft and features HDMI and composite video inputs. It features two key components, one for the air end and one for the ground end. The Lightbridge 2.4G Full HD Video Downlink with OSD and Control from DJI is designed to provide a complete FPV wireless relay solution, combining the video downlink, OSD (on screen display) data, and control signal in one system.
0 Comments
Leave a Reply. |